Description
everblue Iron-free Alum powder rapidly clarifies cloudy water. It is used to settle suspended dust and dead algae spores. Alum powder will flocculate cloudy or muddy water.
Directions
Adjust the pH to above 7.8 before adding Alum powder. Switch off filter and remove the Automatic Pool Cleaner. Disperse the Alum powder over the entire surface of the pool. 2 kg should be sufficient for a pool of 40 000 - 100 000 litres. Leave the filter switched on for 18-24 hours. The suspended matter will settle onto the pool floor and should manually vacuumed to waste within 24 hours. Contact pH necessary to the recommended range of 7.2-7.6. General pool care tips: To avoid potential staining from metals that may exists in your water, add 1 bottle of everblue Metal Remover: follow pack for instructions. Maintain filtration system in good order. Run pump for 12-14 hours/day in summer and 8-10 hours/day in winter. Efficient filtration leads to less hassle and costs in the long run. Clear out pump and weir baskets weekly. Always maintain chlorine residual at 1-3ppm (minimum). Shock treat during adverse conditions (e.g., extreme weather, prior to and after high bather loads) with advanced, dual-function Aqua cure TURBO SHOCK or will Pool Magic for metal-based pools. Clear out pump and weir baskets weekly. Brush pool walls and floor weekly. Maintain total alkalinity (TA) level at between 80-120ppm. Check this monthly.
Safety information
Keep out of reach of children. Store in a cool and dry place. Keep out of direct sunlight. Never mix pool chemicals. Mix only with water.
In the event of contact with skin or eyes, wash thoroughly with clean water. If any irritation persists, seek medical attention. Product contains Aluminium Sulphate.
